Contents

Topic Page

1 Overview .............................................................................................................................................. 3

2 Prerequisites ....................................................................................................................................... 3

3 Starting the Installation System ........................................................................................................ 4

4 Available Options ............................................................................................................................... 4

Remark

Version S169372-103 Languages English Functions Installation of the internal CF-Card to get a bootable system

This software works only on an mPro400GC controller. The software must be copied onto a (preferably blank) USB stick. A USB keyboard must be connected to the controller.

To make USB stick bootable, unpack the contents of the provided zip-file onto the root folder of the stick. After unpacking, it should look like this:

To start the installation system, an empty CF card must be inserted and the USB stick must be connected to one of the USB ports. Switch on the Controller, and it boots from the USB stick. After that, you will see the menu described below:

If something went wrong with the last software installation, the last backup can be restored by using this option.

With this option, the internal CF card will be partitioned and formatted. After that, the default software version will be installed This option should be used with CF cards bigger than 128 MB. The previously installed mPro Software, Parameters and Rundown data will be de- leted!

With this option, the default software will be installed on the first partition of the CF card. All data stored on the second partition (e.g. Rundown data and Parameters) will stay on the con- troller. Besides that, the parameters of the current mPro software will be restored. After that, the mPro software has to be re-installed.

With this option, the default software will be installed on the first partition of the CF card. All data stored on the second partition (e.g. Rundown data and Parameters) will stay on the con- troller. Besides that, the parameters and the current mPro software will be restored.

All Parameter Changes will be reverted to Factory Defaults provided with the software pack- age.

The latest Boot loader software will be flashed into EEPROM.

After selecting this option, the system should be restarted.