ingersoll-rand-spisok-detalei-qx-connect

Ingersoll Rand

TL-VP1T-PLM

Edition 2 January 2022

Cordless Screwdriver and Nutrunner

QX Connect Series

Parts Information

Save These Instructions

QX{ }2P{ } Housing Assembly - Exploded View

OFF # T10 0.8 - 1.2 Nm

Use lithium-based, electrical contact grease with no particles for all electrical connections

F O F 0.3 - 0.5 Nm

2.5 mm

2 TL-VP1T-PLM_ed2

QX{ }2P{ } Housing Assembly - Parts List

Item Part Description Part Number (CCN)

Gear Case Assembly, 1/4" Quick Change VP1-A8-Q4 (47103320) Gear Case Assembly, 1/4" Square Drive VP1-A8-S4 (47103312) Gear Case Assembly, 3/8" Square Drive VP1-A8-S6 (47104179)

Gear Pack Assembly, QX{ }2PT004{ } Series TA-VP1T-037-13P18 Gear Pack Assembly, QX{ }2PT008{ } Series TA-VP1T-037-17P1 Gear Pack Assembly, QX{ }2PT012{ } Series TA-VP1T-037-26P6 Gear Pack Assembly, QX{ }2PT018{ } and QX{ }2PT024{ } Series TA-VP1-2169-16C

3 Transducer Assembly, QX{ }2PT004{ }, QX{ }2PT008{ } and QX{ }2PT012{ } Series VP1-A756 (47107073) Transducer Assembly, QX{ }2PT018{ } and QX{ }2PT024{ } Series VP1-A756-18 (47515463001) 4 Screw (M3 x 0.5), (2 required) CPS2-667-735 (45589140) 5 Motor Mount TP-VP1-108 6 Motor Assembly TA-VP1-054 7 Trigger Assembly TP-VP1-A093RD 8 Spring VP1-726 (47088356) 9 Handle Assembly (both halves) VP1-A59 (48394266) 10 Switch, F/R Assembly TP-VP1-A075RD

Back Cap Assembly, QX{ }D2P{ } Series

**11

See Pistol Back Cap Table Back Cap Assembly, QX{ }N2P{ } Series Back Cap Assembly QXWD2P{ } Series * Keypad TP-VA1-070RD * OLED Display VP1-888-C (47526666) 12 Screw (9 required) VP1-105 (47111778)

Motor Controller Board, 20V QX{ }2PT004{ }, QX{ }2PT008{ }, QX{ }2PT012{ } and QX{ }2PT018{ } Series TA-VP1T-499-1

Motor Controller Board, 40V QX{ }2PT024{ } Series TA-VA2T-499-1 14 USB Cover TP-VP1T-441RD 15 Retainer Battery, QX{ }2P{ }V{ } and QX{ }2P{ }H{ } VP1-202V (47506474001) 16 PCB, Trigger and F/R 84737-A499-5 (47101332) 17 Internal Interface Cable 84737-CABLE-1 (47106117) 18 Power Board Assembly, 20V Pistol TA-VP1T-499-3 19 Motor Hall Cable 84737-CABLE-2 (47106299) 20 O-Ring, PCB VP1-282 (47104211) 21 Name Plate Label TL-VP1T-301-P 22 Certification Label TL-VP1T-300 23 Information Label TL-VP1T-486

Warning: 24 Warning Label, QX{ }2P{ }P and QX{ }2P{ }E{ } Series TL-VP1T-099-P Warning Label, QX{ }2P{ }V and QX{ }2P{ }H{ } Series TL-VP1T-099-V

Tool Foot Label, QX{ }2P{ }P{ } Series TL-VP1T-099-3 Tool Foot Label, QX{ }2P{ }E{ } Series TL-VP1T-099-4 Tool Foot Label, QX{ }2P{ }V{ } Series TL-VP1T-099-1 Tool Foot Label, QX{ }2P{ }H{ } Series TL-VP1T-099-2 Tool Foot Label, QXWD2P{ }P{ } Series TL-VP1T-099-5 Tool Foot Label, QXWD2P{ }E{ } Series TL-VP1T-099-6 26 Retainer foot Label, QX{ }2P{ }V and QX{ }2P{ }H{ } Series VP1-99V-2 (47508447001) * IR #69 Grease VP1-1LB (48413157)

Indicates not illustrated. ** Contact an Ingersoll Rand certified Service Center or your distributor to program this tool. All display assemblies are shipped in default mode and need to be programmed before use.

VP1-A8-S6 3/₈ " Square Gear Case Assembly QX{ }2PT{ }S06 Series

OFF (VP1-00003) 14 - 16 Nm

Item Part Description Part Number (CCN)

27 Nut VP1-305 (47112230)

28 Thrust Washer DAA6A-107 (04694006)

29 Thrust Bearing R1610-105 (03119559) 30 Gear Housing Assembly VP1-A40 (47103882) 31 Spindle, Square 3/8" VP1-807-S6 32 Retainer 5020-716 (03046679) 33 Spring 401-718 (03060993

VP1-A8-S4 ¼ " Square Gear Case Assembly QX{ }2PT{ }S04 Series

OFF (VP1-00003) 14 - 16 Nm

Item Part Description Part Number (CCN)

27 Nut VP1-305 (47112230)

28 Thrust Washer DAA6A-107 (04694006) 29 Thrust Bearing R1610-105 (03119559) 30 Gear Housing Assembly VP1-A40 (47103882) 34 Pin 47028 (04130266)

35 Insert (Rubber) 46749 (04124632)

36 Spindle, ¼" Square VP1-807-S4

4 TL-VP1T-PLM_ed2

VP1-A8-Q4 Quick Change Gear Case Assembly QX{ }2PT{ }04 Series

OFF (VP1-00003) 14 - 16 Nm

Item Part Description Part Number (CCN)

27 Nut VP1-305 (47112230)

28 Thrust Washer DAA6A-107 (04694006)

29 Thrust Bearing R1610-105 (03119559) 30 Gear Housing Assembly VP1-A40 (47103882) 37 Ball R000B-263 (03095031) 38 Multi Turn Snap Ring 182A13-CXRSN50 (95994521)

39 Collar, Quick Change CPS2-930 (45551827)

40 Spring TRH-931 (04681615)

41 Spacer, Quick Change CPS2-244 (45555125)

42 Retaining Ring VP1-118 (47512717) 43 Spindle, Quick Connect VP1-8-Q4 (47103346)

Back Cap Assembly – 20V Pistol Tool

CCN (Part Number) Model Type CCN (Part Number) Model Type QXXD2PT000P000 QXXD2P{ }P{ } QXXN2PT000P000 QXXN2P{ }P{ }

QXXD2PT000E000 QXXD2P{ }E{ } QXXN2PT000E000 QXXN2P{ }E{ } QXBD2PT000P000 QXBD2P{ }P{ } QXBN2PT000P000 QXBN2P{ }E{ } QXBD2PT000E000 QXBD2P{ }E{ } QXBN2PT000E000 QXBN2P{ }P{ } QXFD2PT000P000 QXFD2P{ }P{ } QXFN2PT000P000 QXFN2P{ }P{ }

QXFD2PT000E000 QXFD2P{ }E{ } QXFN2PT000E000 QXFN2P{ }E{ }

QXWD2PT000P000 QXWD2P{ }P{ } --- ---

QXWD2PT000E000 QXWD2P{ }E{ } --- ---

Suggested Tools

Tool Used Part Description Where Used?

Torque Screwdriver 2 Nm capacity Housing and Motor Mount screws T10 Torx Bit --- Housing screws

Allen Wrench 2 mm Motor Mount screws Nylon Pick --- O-Rings, Wires, etc. Torque Wrench ⅜" Square Drive, 20 Nm capacity Gear Case Housing Nut Bearing Nut Tool IR Part # VP1-00003 (47128921) Gear Case Housing Nut

QX{ }2A{ } Housing Assembly - Exploded View

F O F 0.8 - 1.2 Nm

Use lithium-based, electrical contact grease with no particles for all electrical connections

F O F 5 - 7 IN-OZ

F O F 0.8 - 1.2 Nm

2X F O F .0 m 4 N 6.0 -

m 2 m

X 2 F O F .0 m 4 N 6.0 -

m 2 m

27 - 33 Nm OFF

27-33 Nm OFF

27 - 33 Nm OFF

20 - 25 Nm OFF

6 TL-VP1T-PLM_ed2

QX{ }2A{ } Housing Assembly - Parts List

Item Part Description Part Number (CCN)

1 Angle Head Assembly

OLED Display VP1-888-C (47526666)

See Table 2 2 Lock Spacer

22 Screw (7 required) 47111778

23 Name Plate Assembly TA-VA1T-301-P

3 Plug, F/R Blank VA1-556 (47522589001)

24 Retainer Foot Label VP1-99V-2 (47508447001)

4 Spacer

Warning: 25 Retainer Warning Label VP1-99V (47506214001)

See Table 2 5 Gear Case Assembly

Warning: Warning Label TL-VA1T-099-V

6 Gear Pack Assembly

Warning: Warning Label TL-VA1T-099-P

7 Transducer Assembly

8 Screw CPS2-667-735 (45589140)

Tool Foot Label, QX{ }2A{ }P TL-VP1T-099-3

9 Motor Mount Assembly VA1-A40Y

Tool Foot Label, QX{ }2A{ }E TL-VP1T-099-4

10 Motor Assembly TA-VP1-054

Tool Foot Label, QX{ }2A{ }V TL-VP1T-099-1

11 Screw, Grub VA1-78 (47507397001)

Tool Foot Label, QX{ }2A{ }H TL-VP1T-099-2

12 Motor Mount Support VA1-A28 (47504028001)

Tool Foot Label, QXWD2A{ }P{ } TL-VP1T-099-5

13 Screw 4751446001

Tool Foot Label, QXWD2A{ }E{ } TL-VP1T-099-6

14 Hex, Nut 19M4JS7M3 (45638756)

28 Information Label TL-VP1T-300

15 Button, F/R TP-VA1-075RD

29 Certification Label TL-VP1T-486

16 Trigger Assembly TP-VA1T-093RD

30 Internal Interface Cable VA1-505 (24471336)

17 Power Board Assembly TA-VA1T-499-3

31 Motor Control Board TA-VP1T-499-1

18 O-Ring, PCB VP1-282 (47104211)

32 Battery Retention Device VA1-202V (47521241001)

19 Spring VA1-726 (24362386)

33 USB Cover TP-VA1-441RD

20 Housing Assembly VA1-A59 (4750731101)

IR #69 Grease, 1lb VP1-1lb (48413157)

Back Cap Assembly, QX{ }D2A{ }

IR #67 Grease, 4oz 67-4T (04637336)

IR #67 Grease, 1lb 67-1LB

Table Back Cap Assembly, QX{ }N2A{ }

See 20V Angle Back Cap

**21

IR #67 Grease, 8lb 67-8LB

Grease Tube Head (For QX Angle tools. Use with 4 Oz Grease Tube)

Back Cap Assembly, QXWD2A{ }

GTH-1 (04616124)

Keypad TP-VA1-070RD

Indicates not illustrated. * * Contact an Ingersoll Rand certified Service Center or your distributor to program this tool. All display assemblies are shipped in default mode and need to be programmed before use.

QX{ }2A Attachment Components - Exploded View

Part Number

(CCN)

Item Part Description

QX{ }2A{ }027{ }S06 QX{ }2A{ }018{ }Q04 QX{ }2A{ }018{ }S06 QX{ }2A{ }015{ }S06 QX{ }2A{ }010{ }S06 QX{ }2A{ }005{ }Q04

1 Angle Head Assembly

GAA4S6K (47524190001)

CPS3Q4 (45601457)

CPS3S6 (45601432)

QAS-25-A550

QAS-18-A550-SQ4

(47152582)

(48617062)

2 Lock Spacer --- CPS3-682 (45592193)

CPS3-682 (45592193)

QAS-682 (47151170)

4 Spacer VA1-80 (47515640001) --- --- --- --- ---

5 Gear Case Assembly VA1-180-AL (47516176001)

VA1-A37-CP

VA1-A37-RS

(24509523)

(24627010)

(24627010) 6 Gear Pack Assembly TA-VA1T-037-39P7 TA-VA1T-037-26P6 TA-VA1T-037-36P6 TA-VA1T-037-36P6 TA-VA1T-037-17P1 TA-VA1T-037-13P18

7 Transducer Assembly VA1-A756-27 (47515475001)

VA1-A756 (24358798)

34 Bit Retaining Spring --- TRH-931 (04681615) --- --- --- TRH-931 (04681615)

35 Bit Retaining Ball --- R000B-263 (03095031) --- --- --- R000B-263 (03095031)

(95994521) --- --- --- 182A13-CXRSN50

36 Multi Turn Snap Ring --- 182A13-CXRSN50

(95994521)

37 Collar, Quick Change --- CPS2-930 (45551827) --- --- --- CPS2-930 (45551827)

38 Spacer, Quick Change --- CPS2-244 (45555125) --- --- --- CPS2-244 (45555125)

39 Retaining Ring --- VP1-118 (47512717) --- --- --- VP1-118 (47512717)

40 Socket Retaining Pin 5020-716 (03046679) --- 5020-716 (03046679)

5020-716 (03046679)

5020-716 (03046679) ---

41 Socket Retaining Spring

401-718 (03060993) --- 401-718 (03060993)

401-718 (03060993)

401-718 (03060993) ---

42 Retaining Ring --- 184A13CXUR81

184A13CXUR81

(96955059)

43 Bearing Spindle (2 required) --- CPS2-22 (45552809)

CPS2-22 (45552809)

44 O-Ring (2 required) --- 20A11CMC018

20A11CMC018

(96955042)

45 Spacer GEA40-591 (80119605) --- --- --- --- ---

8 TL-VP1T-PLM_ed2

BACK CAP ASSEMBLY - 20V Angle

Part Number Model Type Part Number Model Type QXXD2AT000P000 QXXD2A{ }P{ } QXXN2AT000P000 QXXN2A{ }P{ }

QXXD2AT000E000 QXXD2A{ }E{ } QXXN2AT000E000 QXXN2A{ }E{ } QXBD2AT000P000 QXBD2A{ }P{ } QXBN2AT000P000 QXBN2A{ }E{ } QXBD2AT000E000 QXBD2A{ }E{ } QXBN2AT000E000 QXBN2A{ }P{ } QXFD2AT000P000 QXFD2A{ }P{ } QXFN2AT000P000 QXFN2A{ }P{ }

QXFD2AT000E000 QXFD2A{ }E{ } QXFN2AT000E000 QXFN2A{ }E{ }

QXWD2AT000P000 QXWD2A{ }P{ } --- ---

QXWD2AT000E000 QXWD2A{ }E{ } --- ---

QX{ }5A{ } Housing Assembly - Exploded View

Use lithium-based, electrical contact grease with no particles for all electrical connections

10 TL-VP1T-PLM_ed2

QX{ }5A{ } Housing Assembly - Parts List

Item Part Description Part Number (CCN)

22 Internal Interface Cable VA1-505 (24471336)

Angle Head Assembly: QX{ }5A{ }020 and QX{ }5A{ }030 GAA2S6-H (47527606001)

Back Cap Assembly: QX{ }D5A{ }

Angle Head Assembly: QX{ }5A{ }35{ }S08 GAA4S8-H (47527607001)

See 40V Angle Back Cap

Table Back Cap Assembly: QX{ }N5A{ }

**23

Angle Head Assembly: QX{ }5A{ }035{ }S06 GAA4S6-H (47527608001)

Back Cap Assembly: QXWD5A{ }

Angle Head Assembly: QX{ }5A{ }040 and QX{ }5A{ }080 GAA5S8-H (47527609001)

Keypad TP-VA1-070RD

2 Coupling Nut GEA40-27 (22041180)

OLED Display VP1-888-C (47526666)

3 Coupling Nut Retainer DAA4-29 (04341368)

24 Battery Retainer Device VA1-220V (47521241001)

4 Spacer GEA40-591 (80119605)

25 Screw VP1-105 (47111778)

5 Retaining Ring W64-118 (03084266)

26 Housing Assembly VA2-A59 (47518205001)

6 WSHR-Gear Retainer DEM40-81 (04569752)

27 O-Ring, PCB VP1-282 (47104211)

7 Seal, Grease GEA40-248 (80106958)

28 Name Plate Label TL-VA1T-301-P

8 Spring, Wave (1.375 O.D) GEA40-250 (80106982)

Warning: Warning Label: QX{ }5A{ }V TL-VA1T-099-V

Gear Pack Assembly: QX{ }5A{ }020 GEA40-17-M37 (22038186)

Warning: Warning Label: QX{ }5A{ }P TL-VA1T-099-P

Tool Foot Table, QX{ }5A{ }V TL-VP1T-099-1

Gear Pack Assembly: QX{ }5A{ }030 GEA40-22-M37 (22038178)

Tool Foot Table, QX{ }5A{ }H TL-VP1T-099-2

Tool Foot Table, QX{ }5A{ }P TL-VP1T-099-3

Gear Pack Assembly: QX{ }5A{ }035 and QX{ }5A{ }040 GEA40-28-M37 (22038160)

Tool Foot Table, QX{ }5A{ }E TL-VP1T-099-4

Gear Pack Assembly: QX{ }5A{ }080 GEA40-40-M37 (22036503)

Tool Foot Table, QXW5A{ }P TL-VP1T-099-5

Tool Foot Table, QXW5A{ }E TL-VP1T-099-6

10 Gear Case Viper HT ---

31 Certification Label TL-VP1T-300

11 Sleeve, Gear Case VA2-145 (47511179001)

32 Information Label TL-VP1T-486

12 Cover, Motor Mount VA2-427 (47511904001)

Warning: 33 Warning Label VP1-99V (47506214001)

13 Transducer Assembly VA2-A756 (47518495001)

34 Battery Holder Label VP1-99V-2 (47508447001)

K7 Motor Assembly: { }20PS06, { }30PS06, { }30PS08, { }60PS08 and { }80PS08

35 Motor Controller Board TA-VA2T-499-1

VA2-K53-7 (47539541001)

IR #67 Grease, 4 oz 67-4T

K11 Motor Assembly: { }35PS06, { }35PS08 and { }40PS08 VA2-K53-11 (47539540001)

IR #67 Grease, 1 lb 67-1 LB

IR #67 Grease, 8 lb 67 8 LB

14 Pinion ---

Grease Tube Head (for QX{ }5A{ } Angle Tools. Use with 4 oz Grease Tube)

15 Motor Assembly ---

GTH-1

16 Plug, F/R Blank VA1-556 (47522589001)

IR #170 Grease, 1 lb 170-1LB

17 Button F/R Assembly TP-VA1-075RD

IR #170 Grease, 8 lb 170-8LB

18 Trigger Assembly TP-VA1-093RD

19 Spring, Torsional VA1-726 (24362386)

20 USB Cover TP-VA1-441RD

21 Power Board Assembly TA-VA2T-499-3

Indicates not illustrated. * * Contact an Ingersoll Rand certified Service Center or your distributor to program this tool. All display assemblies are shipped in default mode and need to be programmed before use.

QX{ }5A Transducer Assembly and Gearing Components - Exploded View

Ingersoll Rand #170

QX{ }5A Transducer Assembly and Gearing Components - Parts List

Part Number (CCN)

Item Part Description

QX{ }60PS08 &

QX{ }40PS08, QX{ }35PS08,

QX{ }30PS08 &

QX{ }30PS06 QX{ }20PS06

QX{ }80PS08

& QX{ }35PS06

14 Pinion --- --- --- ---

13 Transducer Assembly VA2-A756 (47518495001) VA2-A756 (47518495001) VA2-A756 (47518495001) VA2-A756 (47518495001)

9 Gear Pack Assembly GEA40-40-M37 (22036503) GEA40-28-M37 (22038160) GEA40-22-M37 (22038178) GEA40-17-M37 (22038186)

36 Ring Gear GEA40-406 (22038079) GEA40-406 (22038079) GEA40-406 (22038079) GEA40-406 (22038079)

37 Retaining Ring 4E-118 (03079738) 4E-118 (03079738) 4E-118 (03079738) 4E-118 (03079738)

38 Spacer, Rear GEA40-81 (22036495) GEA40-81 (22036495) GEA40-81 (22036495) GEA40-81 (22036495)

39 Gearhead Assembly (1st stage) GEA40-A216-20 (22038004) GEA40-A216-19 (80096126) GEA40-A216-17 (80096142) GEA40-A216-14 (80096050)

Gearhead --- --- --- ---

Planet Pin --- --- --- ---

40 Needle Bearing (1st) 6WTM-500 (03800299) DAA40-500 (04008108) 6WTM-500 (03800299) 6WTM-500 (03800299)

41 Planet Gear (1st) 4RLL-10 (03822962) DEA31-10 (04282158) 4RLN-10 (03822988) GEA40-10-14 (80098064)

42 Sun Gear (1st) --- --- DAA25-17 (04008140) GEA40-17-21 (22039317)

43 Spacer GEA40-80 (22041883) GEA40-80 (22041883) GEA40-80 (22041883) GEA40-80 (22041883)

44 Spindle Assembly (2nd stage) GEA40-A8-18 (22038145) GEA40-A8-18 (22038145) GEA40-A8-18 (22038145) GEA40-A8-18 (22038145)

Spindle --- --- --- ---

Planet Pin --- --- --- ---

Planet Gear (2nd) --- --- --- ---

Planet Bearing (2nd) --- --- --- ---

7 Grease Seal GEA40-248 (80106958) GEA40-248 (80106958) GEA40-248 (80106958) GEA40-248 (80106958)

8 Wave Spring GEA40-250 (80106982) GEA40-250 (80106982) GEA40-250 (80106982) GEA40-250 (80106982)

6 Retainer Washer DEM40-81 (04569752) DEM40-81 (04569752) DEM40-81 (04569752) DEM40-81 (04569752)

1 Retaining Ring W64-118 (03084266) W64-118 (03084266) W64-118 (03084266) W64-118 (03084266)

Item included as part of sub-assembly.

12 TL-VP1T-PLM_ed2

QX{ }5A Angle Assembly Attachment - Exploded View

Use with Optional Mounting Kits

OFF 61 - 68 Nm

Use with Standard Motor Housing Assemblies

OFF 61 - 68 Nm

Ingersoll Rand #67

QX{ }5A Angle Head Assembly - Parts List

Part Number (CCN)

Item Part Description

QX{ }80PS08, QX{ }60PS08 &

QX{ }35PS08 &

QX{ }35PS06 &

QX{ }30PS06 QX{ }20PS06

QX{ }40PS08

QX{ }30PS08

1 Angle Assembly Attachment GAA5S8-H (47527609001) GAA4S8-H (47527607001)

GAA4S6-H (47527608001)

GAA2S6-H (47527606001)

45 Socket, Retaining Spring 5UHD-718 (03072766) 5UHD-718 (03072766) 401-718 (03060993) 401-718 (03060993)

46 Socket, Retaining Pin 804-716 (03064201) 804-716 (03064201) 5020-716 (03046679) 5020-716 (03046679)

4 Spacer GEA40-591 (80119605) GEA40-591 (80119605) GEA40-591 (80119605) GEA40-591 (80119605)

2 Coupling Nut, Long (with holes) GEA40-27 (22041180) GEA40-27 (22041180) GEA40-27 (22041180) GEA40-27 (22041180)

47 Coupling Nut, Short (with flats) DAA4-27 (04341285) DAA4-27 (04341285) DAA4-27 (04341285) DAA4-27 (04341285)

5 Retainer DAA4-29 (04341368) DAA4-29 (04341368) DAA4-29 (04341368) DAA4-29 (04341368)

Back Cap Assembly - 40V Angle Part Number Model Type Part number Model Type QXXD5AT000P000 QXXD5A{ }P{ } QXXN5AT000P000 QXXN5A{ }P{ }

QXXD5AT000E000 QXXD5A{ }E{ } QXXN5AT000E000 QXXN5A{ }E{ } QXBD5AT000P000 QXBD5A{ }P{ } QXBN5AT000P000 QXBN5A{ }E{ } QXBD5AT000E000 QXBD5A{ }E{ } QXBN5AT000E000 QXBN5A{ }P{ } QXFD5AT000P000 QXFD5A{ }P{ } QXFN5AT000P000 QXFN5A{ }P{ }

QXFD5AT000E000 QXFD5A{ }E{ } QXFN5AT000E000 QXFN5A{ }E{ }

QXWD5AT000P000 QXWD5A{ }P{ } --- ---

QXWD5AT000E000 QXWD5A{ }E{ } --- ---

QX{ }5A Suggested Tools

Tool Used Part Description Where Used?

Spanner Wrench IR Part #GEA40-478 (80114440) Coupling Nut

Torque Wrench 1/2" Sq. Drive, 50 ft-lb capacity General use

Adjustable Wrench --- Coupling Nut (with flats)

Internal Snap Ring Pliers --- General use

Pick --- O-Rings, Wires, etc.

T10 Torx Bit --- Housing Screws

14 TL-VP1T-PLM_ed2

Tool Assembly

Information Label

Certiﬁcation Label

QX{ }2P

Information Label

Certiﬁcation Label

QX{ }2A

Certiﬁcation Label Information Label

QX{ }5A

Part Description Part Number (CCN)

Information Label TL-VP1T-486

Certification Label TL-VP1T-300

QX Accessories (Optional)

6, 8

9,10

OFF 1 - 3 Nm

4 mm

17 OFF 2 - 3 Nm

3 mm

OFF 7 - 8 Nm

4 mm

16 TL-VP1T-PLM_ed2

QX Accessories (Optional) - Parts List

Item Part Description Part Number (CCN) 1 Communication Kit (USB Cable & ICS Software) 84737-COMM-KIT (48414460) 2 USB Cable 84737-CABLE-USB (48412613)

3 Bearing Nut Tool VP1-00003 (47128921)

4 Suspension Bail VP1-365 (48382147)

5 Auxiliary Handle VP1-A48 (47107263)

6 Motor Unit Kit VP1-K40

7 Gear Case Holding Fixture (use with Bearing Nut Tool, VP1-00003) VP1-A00004 (47603377001)

Tool Boot with Covered Display (Red) VP1-BOOT-NP (47498430) Tool Boot with Open Display (White) VP1-WT-BOOT (47557360001) Tool Boot with Open Display (Red) VP1-BOOT (48411292)

9 Retaining Ring Tool (for VP1-118) VP1-00001 (47126982)

10 Retaining Ring Tool (for 182A13-CXRSN50) VP1-00002 (47128889)

* 11 Holder VA1-239 (47526047)

* 12 Tool Hanger Assembly for Models { }005P{ }, { }010P{ }, { }015P{ }, { }018P{ } CPS2-A365 (45592979) for Models { }020P{ }, { }027P{ }, { }030P{ }, { }035P{ }, { }040P{ }, { }060P{ }, { }080P{ } GEA40-A365 (45567849)

* 13 Angle Head Sleeve for Models { }018P{ }, { }020P{ } GEA40-170 (80095847) for Models { }027P{ }, { }030P{ }, { }035P{ } GEA40-171 (80095888) for Models { }040P{ }, { }060P{ }, { }080P{ } GEA40-172 (80095409)

* 14 Extended Boot + for Model { }005P{ } VA1-R18-170 (47526045) + for Models { }010P{ }, { }015P{ } VA1-R25-170 (47526046) for Models { }018P{ }, { }020P{ } GAA2-170 (80199557) for Models { }027P{ }, { }030P{ }, { }035P{ } GAA4-170 (80199052) for Models { }040P{ }, { }060P{ }, { }080P{ } GAA5-170 (80199656)

* 15 Spanner Wrench for Tool Series { }2A{ } CPS2-478 (45611563) for Tool Series { }5A{ } GEA40-478 (80114440)

* 16 Dowel Pin for Spanner Wrench CPS2-478 CPS2-478L (45611639) for Spanner Wrench GEA40-478 GEA40-478S (80114689)

17 Clamp Fixture (for Models { }005P{ }, { }010P{ }, { }015P{ }, { }018P{ }) CPS2-K48 (45626546)

* ^ 18 Reaction Bar Assembly DEA120-K48 (04642369)

* ^ 19 Mounting Plate Assembly DAM120-K48 (04340535)

* ^ 21 Mounting Plate Assembly (flanged) GEM120-K48 (80112790) † Socket Tray Retaining Pin & Spring (for 3/8" and 1/2" square drives) KIT-PFS (45567997) † Socket Tray Retaining Pin & Spring (for 3/8" square drive only, Quantity: 5 of each) GEA15-38KIT-5 (45612033) † Socket Tray Retaining Pin & Spring (for 1/2" square drive only, Quantity: 5 of each) GEA40-38KIT-5 (45612041)

QX Pistol Tool Series { }2P{ } accessory only. * * QX Angle Tool Series { }2A{ } and { }5A{ } accessories only. ^ For QX { }5A{ } Series and QX { }27P{ } Models using coupling nut DAA4-27. + For these models, extended boot may be trimmed to fit standard angle heads. # Additional colors available upon request. Refer all communication to the nearest Ingersoll Rand Office or Distributor. † Indicates not illustrated.

Parts and Maintenance

Use lithium-based, electrical contact grease with no particles for all electrical connections.

When tool life has expired, it is recommended that the tool be disassembled, degreased and parts separated by material for proper recycling.

Tool repair and maintenance should only be carried out by an authorized Service Center.

Refer all communications to the nearest Ingersoll Rand office or distributor.